Page 2
If you lend your product to another party, inform that party of the safety-related operating pro- cedures and hand over this assembly guide. If you require additional copies of this manual, you can obtain them free of charge from TW AUDiO or download them from www.twaudio.de Instructions in this user manual...
Note the operating modes described in this assembly instructions. Other uses are not per- missible. Damage caused by improper use is not covered by TWAMBO. Before every operation, check the scope of delivery of the SBC12 swivel bracket for its com- pleteness and ensure that all parts are in perfect condition. WARNING The SBC12 swivel bracket may only used with the C12 loudspeaker.
Page 6
Assembly Instructions SBC12 The payload of the SBC12 swivel bracket is designed of one C12 loudspeaker. Do not exceed this payload. WARNING Before mounting the SBC12 swivel bracket check that e.g. ceilings, trussus and tripods are capable to carrying the payload of the components.
Assembly Instructions SBC12 3. Technical data Data sheet Maximum load capacity 1x C12 Dimensions (h x w x d) 375 x 609 x 190mm [14.76 x 23.98 x 7,48 in] Weight 5,7 kg [12.6 lbs] Surface Powder-coated...
1. Place the C12 loud speaker on the floor with the bottom or top, depending on the applica- tion. Make sure to place the speaker on a clean, non-slippery surface. 2. Place the SBC12 swivel bracket with its lengthwise strut of the inner bracket on the rig- ging track of the C12 loudspeaker.
Assembly Instructions SBC12 3. Then pull the two retainers (see figure 2.1 - pos.3) up. 4. Then snap the SBC12 swivel bracket into the rigging track of the C12 loudspeaker by releasing the two retainers again. 5. Make sure that all retainers are always completely locked in place! WARNING Figure 4.3 - Assembly SBC12 to C12 loudspeaker...
Assembly Instructions SBC12 Assembly SBC12 swivel bracket on tripod Mount the C12 loudspeaker with SBC12 swivel bracket and the HSF pole mount flange on the tripod. Make sure that you use suitable fastening material and that the connections are set...
Assembly Instructions SBC12 5. Transport and storage When transporting and storing the unit, it is important to ensure that the surface of the swi- vel bracket are not damaged. Moisture can penetrate where steel surfaces are exposed by scratches and result in corrosion.
Assembly Instructions SBC12 6. CE Conformity Declaration Copy and translation of the original CE Conformity Declaration: We hereby declare that the below-referenced components by virtue of their design and con- struction, and in the configuration placed on the market by us, satisfy the safety and health requirements of the applicable EC directives.
Need help?
Do you have a question about the SBC12 and is the answer not in the manual?
Questions and answers