Page 2
If you lend your product to another party, inform that party of the safety-related operating pro- cedures and hand over this assembly guide. If you require additional copies of this manual, you can obtain them free of charge from TW AUDiO or download them from www.twaudio.de Instructions in this user manual...
Damage caused by improper use is not covered by TWAMBO. Before every operation, check the scope of delivery of the SBT20 swivel bracket for its com- pleteness and ensure that all parts are in perfect condition. The scope of delivery includes specified components. Only use the recommended and cer- WARNING tified components.
Page 6
Assembly Instructions SBT20 The payload of the SBT20 swivel bracket is designed of one T20 loudspeaker. Do not exceed this payload. WARNING Before mounting the SBT20 swivel bracket check that e.g. ceilings, trussus and tripods are capable to carrying the payload of the components.
Assembly Instructions SBT20 3. Technical data Data sheet Maximum load capacity 1x T20 Dimensions (h x w x d) 295 x 642 x 50 mm [11.61 x 25.28 x 1,97 in] Weight 2,3 kg [5.1 lbs] Surface Powder-coated...
4. Commissioning Setup The SBT20 swivel bracket is designed for the hanging and stacking operation. TW AUDiO provides a wide range of accessories to securely attach the swivel bracket. Please note that setting up the system structures always requires two persons!
Assembly SBT20 swivel bracket to trusses or ceiling Attach the DHST Doughty Halfcoupler Slimline to the ø12.2mm hole located on the crossbar of the SBT20 swivel bracket when using the SBT20 swivel bracket on trusses. Make sure that the connections are set firmly and correctly!
Assembly Instructions SBT20 Assembly SBT20 swivel bracket on tripod Mount the T20 loudspeaker with SBT20 swivel bracket and the HSF pole mount flange on the tripod. Make sure that you use suitable fastening material and that the connections are set...
Assembly Instructions SBT20 5. Transport and storage When transporting and storing the unit, it is important to ensure that the surface of the swi- vel bracket are not damaged. Moisture can penetrate where steel surfaces are exposed by scratches and result in corrosion.
Assembly Instructions SBT20 6. CE Conformity Declaration Copy and translation of the original CE Conformity Declaration: We hereby declare that the below-referenced components by virtue of their design and con- struction, and in the configuration placed on the market by us, satisfy the safety and health requirements of the applicable EC directives.
Need help?
Do you have a question about the SBT20 and is the answer not in the manual?
Questions and answers