LG LSIS6338 E Series Owner's Manual page 73

Electric induction range
Hide thumbs Also See for LSIS6338 E Series:
Table of Contents

Advertisement

Problem
Steam is exhausted
Cooking foods with high moisture produces steam.
through the oven
• This is normal.
vent.
Appliance does not
Cord is not plugged in correctly.
operate.
• Make sure cord is plugged correctly into outlet. Check circuit breakers.
Service wiring is not complete.
• Contact your electrician for assistance.
Power outage.
• Check house lights to be sure. Call your local electric company for service.
Sabbath mode is activated (on some models).
buttons are inactive.
• Press and hold the Settings button for 3 seconds or until
Oven smokes
Control not set properly.
excessively during
• Follow instructions under Setting Oven Controls.
broiling.
Meat too close to the element.
• Reposition the rack to provide proper clearance between the meat and the element.
Meat not properly prepared.
• Remove excess fat from meat. Cut remaining fatty edges to prevent curling.
Insert on broiler pan wrong side up and grease not draining.
• Always place the grid on the broiler pan with ribs up and slots down to allow grease to drip
Grease has built up on oven surfaces. Old grease or food spatters cause excessive
smoking.
• Regular cleaning is necessary when broiling frequently.
Food does not bake
Oven controls improperly set.
or roast properly
• See the "Oven" section in the Operation chapter.
Rack position is incorrect or the rack is not level.
• See the "Oven" section in the Operation chapter.
Incorrect cookware or cookware of improper size being used.
• See the "Oven" section in the Operation chapter.
Oven sensor needs to be adjusted.
• See the "Calibrating the Oven Temperature" section in the Operation chapter.
Food does not broil
Oven controls improperly set.
properly
• Make sure you select the Broil mode properly.
Improper rack position being used.
• See the Broiling Guide.
Cookware not suited for broiling.
• Use broiling pan and grid.
Aluminum foil used on the broiling pan and grid has not been fitted properly and slit as
recommended.
• See the "Oven" section in the Operation chapter.
In some areas the power voltage may be low.
• Preheat the broil element for 5-7 minutes. See the Broiling Guide.
Preheat broil element for searing.
into the pan.
Possible Cause & Solution
appears in the display and all function
sb
TROUBLESHOOTING
disappears from the display.
sb
73

Advertisement

Table of Contents
loading

Table of Contents