Advertisement
4)
Remove Impeller
a. Carefully pull the impeller (#7) away from the rear housing (#8). Due to the strength of the magnetic
field, sufficient force is required to separate the impeller and drive magnets.
⚠ Warning: When dislodging the impeller, exercise caution to ensure adequate force is applied
during the removal process; failure to do so may result in the impeller moving into the rear housing,
posing a risk of finger pinching against sharp edges.
5)
Unfasten Two Screws from Rear Housing
a. Remove the two hex head screws (Item C) from the rear housing.
6)
Remove Rear Housing and Thrust Washer to Complete Disassembly
a. Using both hands, carefully remove rear housing (#8).
b. Remove thrust washer (#5).
c. Store the guide pins (Item A), safety wooden boards (Item B), and screws (Item C) in a safe location
for future assembly/disassembly.
TE-10KS-MD & TE-10PS-MD
3
Advertisement
