Advertisement
SWITCHING BETWEEN AUDIO SOURCES
TAP
TAP
3X
OR
3X
PERSONALIZE YOUR EXPERIENCE
RAZER HEADSET SETUP FOR XBOX APP (XBOX / PC)
Personalize your own EQ preset, customize its RGB lighting and ANC levels, and adjust other advanced
features for a truly immersive gaming experience from your PC or Xbox console.
* Download and install the Razer Headset Setup for Xbox app from the Microsoft Store on your PC
(Windows 10 64-bit or higher) or Xbox console.
RAZER AUDIO APP (MOBILE)
Remap touch gestures, enable Active Noise Cancellation (ANC), customize EQ settings, and even experience
full RGB lighting customization from your mobile device.
Razer Audio
Only available on iOS 13 / Android 10 (or higher) devices with Bluetooth connectivity
Find out more about your wireless multi-platform gaming earbuds at support.razer.com
BLUETOOTH
HYPERSPEED
WIRELESS (2.4 GHZ)
OR
RZR.TO/AUDAPP
(For China only)
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
To achieve maximum safety while using your Razer
Hammerhead HyperSpeed, we suggest that you
adopt the following guidelines:
Should you have trouble operating the device
properly and troubleshooting does not work,
unplug the device and contact the Razer hotline or
go to support.razer.com for assistance.
Do not take apart the device and do not attempt to
operate it under abnormal current loads. Doing so
will void your warranty.
Operate the device only within the specific
temperature range of 0°C (32°F) to 40°C (104°F).
Should the temperature exceed this range, unplug
and/or switch off the device to let the temperature
stabilize to an optimal level.
Your earbuds isolate external ambient sounds even
at low volumes, resulting in lowered awareness
of your external surroundings. Please remove the
earbuds when engaging in activities that require
active awareness of your surroundings.
Listening to excessively loud volumes over
extended periods can damage your hearing.
Furthermore, legislation of certain countries
permits a maximum sound level of 86db to affect
your hearing for 8 hours a day. We, therefore,
recommend that you reduce the volume to a
comfortable level when listening for prolonged
periods. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Hammerhead HyperSpeed requires
minimum maintenance to keep it in optimum
condition. Once a month, we recommend you clean
it using a soft cloth or cotton swab to prevent dirt
buildup. Do not use soap or harsh cleaning agents.
REGULATORY AND COMPLIANCE
INFORMATION
FCC DECLARATION OF CONFORMANCE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the
receiver.
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•
Consult the dealer or an experienced radio TV technician
for help. For more information, refer to the online help
system on razer.com.
FCC CAUTION STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate this equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Advertisement
