Snow blower
Art.no 31-4818
Model DB7404
Please read the entire instruction manual before use
and save it for future reference. We reserve the right for
any errors in text or images and for making any neces-
sary technical changes to this document. If you should
have any questions concerning technical problems
please contact our Customer Services.
Attaching the snow discharge chute
1. Slot the supplied metal clip into the holder on
the snow blower's discharge chute coupling.
GREAT BRITAIN For consumer contact, please visit www.clasohlson.co.uk and click on customer service.
2. Lay out the locking collar as it is to be fitted, i.e.
with the clamp on the right hand side.
3. Place the chute over the coupling on the snow
blower with the opening facing forwards.
4. Clamp the locking collar round the coupling
working from the front to the back. Make sure that
the grooves on the inside of the locking collar fit
over the flanges on the chute and the coupling ring
round the hole on the snow blower.
5. Push the collar on as tightly as you can.
6. Lock the ends of the collar together using the snap
lock. Turning the chute to the side will help you
access the snap lock more easily.
Need help?
Do you have a question about the DB7404 and is the answer not in the manual?
Questions and answers