Maintenance - Skil PWRCORE 20 Owner's Manual

MAINTENANCE

WARNING
Service
WARNING
cause a serious hazard . All machine service should be performed by a SKIL Factory Service
Center or Authorized SKIL Service Station.
General Maintenance
WARNING
ensure safety and reliability, all repairs should be performed by a qualified service
technician .
WARNING
Chemicals can damage, weaken or destroy plastic which may result in serious personal
injury .
NOTICE: Periodically inspect the entire product for damaged, missing, or loose parts such as
screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this
product until all missing or damaged parts are replaced. Please contact customer service or
an authorized service center for assistance.
Cleaning
The machine may be cleaned most effectively with compressed dry air.
WARNING
of foreign matter .
WARNING
ammonia and household detergents that contain ammonia.
Storage and Transportation
Remove the battery pack from the shear/
•
shrubber before storing.
Clean all foreign material from the shear/
•
shrubber.
Always place the blade cover on the cutting
•
blades before transporting or storing the unit.
Keep away from corrosive agents such as
•
garden chemicals and de-icing salts.
Store the machine indoors in a dry and
•
locked-up place, out of reach of children.
Horizontally level and securely mount the
•
easy storage rail on the wall with 2 (#6×1'')
screws (not supplied), then hang the machine
on the easy storage rail as shown in Fig. 8.
To avoid serious personal injury, always remove the battery pack
from the light when cleaning or performing any maintenance.
Preventive maintenance performed by unauthorized personnel may
result in misplacing of internal wires and components which could
When servicing, use only identical replacement parts . Use of any
other parts could create a hazard or cause product damage . To
Do not at any time let brake fluids, gasoline, petroleum based
products, penetrating oils, etc ., come in contact with plastic parts .
Always wear safety goggles when cleaning machines with
compressed air . The ventilation openings must be kept clean and free
Do not attempt to clean by inserting pointed objects through openings.
Certain cleaning agents and solvents damage plastic parts .
these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents,
Fig. 8
Easy storage rail
Some of
17