Table of Contents
Advertisement
Safety Information
WARNING ! This shower can deliver scalding temperatures. For
continued safe operation, follow all instructions, warnings and
cautions contained in this guide and on or inside the shower.
Periodic maintenance may be required to keep the product in
good working order.
The function of a thermostatic mixing valve is to deliver water
consistently at a safe temperature. In keeping with every other
mechanism, it cannot be considered as functionally infallible and
as such, cannot totally replace a supervisor's vigilance where that
is necessary. Provided it is installed, commissioned, operated,
and maintained within manufacturers recommendations, the
risk of failure, if not eliminated, is reduced to the minimum
achievable.
PLEASE OBSERVE THE FOLLOWING TO REDUCE THE RISK
OF INJURY:
Installing the Shower
1.
Installation of the shower must be carried out in accordance
with the instructions by qualified, competent personnel. Read all
instructions before installing the shower.
2.
DO NOT install the shower where it may be exposed to freezing
conditions. Ensure that any pipework that could become frozen
is properly insulated.
3.
DO NOT perform any unspecified modifications to the shower
or its accessories. When servicing only use genuine Kohler Mira
replacement parts.
4.
If the shower is dismantled during installation or servicing then,
upon completion, an inspection must be made to ensure all
connections are tight and that there are no leaks.
5.
The product may be TMV3 or TMV2 approved. Refer to the
installation guide for information regarding product type and
installation suitability.
5
1553346-W2-A
Advertisement
Table of Contents
