Hoist With Motorized Trolley; Electric Installation - Pacific Hoists U-MEGA Series Operations Manual & Parts List

4. HOIST WITH MOTORIZED TROLLEY

Model
PEH050S+PET050S
PEH100S+PET100S
PEH200S+PET200S
5. ELECTRICAL INSTALLATION
The trolley electrical connection must be completed as shown in Illust.1, the Hoist & Trolley
General Arrangement. Generally, the electric housing is provided with three holes in the bottom,
one for trolley motor cord, the second one for trolley power cord from hoist and the third one
for control cord from hoist. Moreover, the optional five holes design for independent usage of
trolley are also available, please refer to the Illus.1. There are two holes on each side of the
housing, on the left is the power cord for trolley, on the right is for the trolley motor cord.
For the details of wiring connection, please refer to the wiring diagrams.
Hoist with trolley wiring diagram shown example as follows:
F2300078310101 is 1 phases model, Please refer to page 10.
For special unit, please see wiring diagram supplied with unit.
Power should be disconnected when making or changing connections, also proper
grounding should be accomplished.
DWG.
A
I 385 126
I 385 126
Ⅱ 395 159
8
Dimensions(mm)
B C D
280 180
280 180
285 185
E H
75~125 500
75~125 550
100~150 625