Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Laserglow VirtuaLine SWITCH LED
Summary of Contents for Laserglow VirtuaLine SWITCH LED
- Page 1 INSTRUCTION MANUAL VirtuaLine™ SWITCH LED Line Projector...
- Page 2 Careful and reasonable efforts have been made to ensure the quality and accuracy of this document, but Laserglow shall not be liable for errors or omissions contained herein, or for any incidental or consequential damages arising from the use of this document or the product itself. Safety information provided in this document is for reference only and should not be considered an adequate substitute for industry-standard laser safety training.
-
Page 3: Table Of Contents
VirtuaLine™ SWITCH LED Line Projector Table of contents Section 1: Safety Information Section 2: Unpacking and Inspection Section 3: Setup and Operation Section 4: Smart Sensor Schematics Section 5: Troubleshooting Section 6: Maintenance Section 7: Warranty Information... -
Page 4: Section 1: Safety Information
If the power cable or plug for the fixture is damaged, it must only be replaced by Laserglow or an authorized service agent to avoid an electric shock or fire hazard. The light source contained in this luminaire shall only be replaced by Laserglow or an authorized service agent. -
Page 5: Section 2: Unpacking And Inspection
If any physical damage or moisture is present, contact Laserglow immediately to report it. 3. Check the contents of the shipment against the packing list: Every fixture¹ includes a mounting bracket², power supply³, and a relay box... -
Page 6: Section 3: Setup And Operation
VirtuaLine™ SWITCH LED Line Projector Section 3: Setup and Operation Then affix the Virtualine™ LED SWITCH to your mounting surface using hardware designed for that type You will receive Virtualine with mounting bracket attached of mounting surface (drywall anchors for drywall without a to the unit as shown in fig. - Page 7 VirtuaLine™ SWITCH LED Line Projector ✔ ✔ ✔ ✔ The projected line can be focused by rotating the small red knob on the back of the fixture. Adjust until the line is as thin as possible. There will only be one ideal focus The projector does not have a power switch and it will turn position.
- Page 8 VirtuaLine™ SWITCH LED Line Projector OFFSET MOUNTING This mounting type will distort the WALL MOUNTING This mounting type will distort the line line projection to a conical shape – thinner closest to the projection to an elliptical shape – thicker in the middle, units, wider it moves away.
- Page 9 VirtuaLine™ SWITCH LED Line Projector Section 4: Smart Trigger Schematics VirtuaLine™ SWITCH will only work when connected to a Smart Trigger System. It consists of a Smart Trigger Controller (Sold Seperately) that will be connected to the Relay Box that came with the VirtuaLine™ SWITCH. Each Fixture will come with one relay box and switching between the color will be handled by the relay box and Smart Trigger Controller.
-
Page 10: Section 5: Troubleshooting
Line is not long enough. Wrong lens fan angle for application. The lens fan angle cannot be changed by the user. Contact Laserglow for assistance. Projected line is very blurry Focus is not set correctly. -
Page 11: Section 6: Maintenance
VirtuaLine™ SWITCH LED Line Projector Section 6: Maintenance Laserglow's Virtualine™ LED SWITCH fixtures require very little maintenance. Depending on the cleanliness of your environment, maintenance may be required with some regularity, or never at all. Inspect the fixture regularly to ensure there is no buildup of debris or dust on the output lens or rear heatsink. -
Page 12: Section 7: Warranty Information
Within North America only, and within the first 30 days of the warranty period, Laserglow will cover the cost of shipping the defective item back to Laserglow and the cost of shipping the repaired/replacement item to the customer. - Page 13 VirtuaLine™ SWITCH LED Line Projector laserglow.com/industrial OTHER BENEFITS (NON-WARRANTY) THAT ARE ACCORDED TO YOU BY LASERGLOW 10% Replacement/Upgrade Credit: At any time, for the lifetime of the product, you may return the product to us in any condition, functional or not, for a trade-in credit equal to 10% of the original purchase price or 10% of the current retail price, whichever is less.
Need help?
Do you have a question about the VirtuaLine SWITCH LED and is the answer not in the manual?
Questions and answers