Download Print this page
Laserglow SafetyCast 80 Instruction Manual

Laserglow SafetyCast 80 Instruction Manual

Virtual projector

Advertisement

Quick Links

INSTRUCTION
MANUAL
SafetyCast™ 80 Virtual Projector

Advertisement

loading
Need help?

Need help?

Do you have a question about the SafetyCast 80 and is the answer not in the manual?

Questions and answers

Summary of Contents for Laserglow SafetyCast 80

  • Page 1 INSTRUCTION MANUAL SafetyCast™ 80 Virtual Projector...
  • Page 2 Careful and reasonable efforts have been made to ensure the quality and accuracy of this document, but Laserglow shall not be liable for errors or omissions contained herein, or for any incidental or consequential damages arising from the use of this document or the product itself. Safety information provided in this document is for reference only and should not be considered an adequate substitute for industry-standard laser safety training.
  • Page 3: Table Of Contents

    SafetyCast™ 80 Virtual Projector Table of contents Section 1: Safety Information Section 2: Unpacking and Inspection Section 3: Setup and Operation Section 4: Accessories and Options Section 5: Troubleshooting Section 6: Maintenance Section 7: Warranty Information...
  • Page 4: Section 1: Safety Information

    If the power cable or plug for the fixture is damaged, it must only be replaced by Laserglow or an authorized service agent to avoid an electric shock or fire hazard. The light source contained in this luminaire shall only be replaced by Laserglow or an authorized service agent.
  • Page 5: Section 2: Unpacking And Inspection

    Note that the chosen projection image template will be installed by Laserglow before shipping – usually it is easy to verify that the image template is installed by looking directly into the projector lens while the projector is off. Never look directly into the lens while the projector is on! If everything is included and there is no evident damage, proceed through this manual for instructions on how to set up and install your projector.
  • Page 6: Section 3: Setup And Operation

    SafetyCast™ 80 Virtual Projector Section 3: Setup and Operation ✔ ✔ ✔ Focus the projection by threading the lens in and out ✔ until the image is well focused. The projector is shipped with the lens all the way retracted to reduce the overall The projector does not have a power switch and will turn size.
  • Page 7 SafetyCast™ 80 Virtual Projector PROJECTION LENSES AND CHANGING THE PROJECTED IMAGE The projector accommodates interchangeable projection lenses to alter the projection size and brightness at various distances. The smaller the projection angle of the lens, the smaller and brighter the image will be. The lens can be removed by simply unscrewing it all the way - please note this may take dozens of full turns.
  • Page 8: Section 4: Accessories And Options

    SafetyCast™ 80 Virtual Projector Section 4: Accessories and Options The most popular accessories for SafetyCast™ 80 Virtual Projector are shown below. For additional details regarding these or other accessories please see our website or contact us directly. Motion Sensors...
  • Page 9: Section 5: Troubleshooting

    SafetyCast™ 80 Virtual Projector Section 5: Troubleshooting If you are experiencing trouble with your projector, please check if the symptom is listed in this guide. Many common problems can be solved without requiring a return. If you need further assistance, please contact us. Do not attempt to disassemble or repair your projector, as this may void your warranty.
  • Page 10: Section 6: Maintenance

    SafetyCast™ 80 Virtual Projector Section 6: Maintenance Laserglow's SafetyCast™ 80 Virtual fixtures require very little maintenance. Depending on the cleanliness of your environment, maintenance may be required with some regularity, or never at all. Inspect the fixture regularly to ensure there is no buildup of debris or dust on the output lens or rear heatsink.
  • Page 11: Section 7: Warranty Information

    Within North America only, and within the first 30 days of the warranty period, Laserglow will cover the cost of shipping the defective item back to Laserglow and the cost of shipping the repaired/replacement item to the customer.
  • Page 12 SafetyCast™ 80 Virtual Projector laserglow.com/industrial OTHER BENEFITS (NON-WARRANTY) THAT ARE ACCORDED TO YOU BY LASERGLOW 10% Replacement/Upgrade Credit: At any time, for the lifetime of the product, you may return the product to us in any condition, functional or not, for a trade-in credit equal to 10% of the original purchase price or 10% of the current retail price, whichever is less.