Advertisement
Quick Links
Advertisement
Related Manuals for Laserglow VirtuaLine PRO LED Line
Summary of Contents for Laserglow VirtuaLine PRO LED Line
- Page 1 INSTRUCTION MANUAL VirtuaLine™ PRO LED Line Projector...
- Page 2 Careful and reasonable efforts have been made to ensure the quality and accuracy of this document, but Laserglow shall not be liable for errors or omissions contained herein, or for any incidental or consequential damages arising from the use of this document or the product itself. Safety information provided in this document is for reference only and should not be considered an adequate substitute for industry-standard laser safety training.
-
Page 3: Table Of Contents
VirtuaLine™ PRO LED Line Projector Table of contents Section 1: Safety Information Section 2: Unpacking and Inspection Section 3: Setup and Operation Section 4: Troubleshooting Section 5: Maintenance Section 6: Warranty Information... -
Page 4: Section 1: Safety Information
If the power cable or plug for the fixture is damaged, it must only be replaced by Laserglow or an authorized service agent to avoid an electric shock or fire hazard. The light source contained in this luminaire shall only be replaced by Laserglow or an authorized service agent. -
Page 5: Section 2: Unpacking And Inspection
If any physical damage or moisture is present, contact Laserglow immediately to report it. 3. Check the contents of the shipment against the packing list: Every fixture¹ includes a mounting bracket²... -
Page 6: Section 3: Setup And Operation
VirtuaLine™ PRO LED Line Projector Section 3: Setup and Operation Then affix the Virtualine™ LED PRO to your mounting surface using hardware designed for that type of You will receive Virtualine with mounting bracket attached mounting surface (drywall anchors for drywall without a to the unit as shown in fig. - Page 7 VirtuaLine™ PRO LED Line Projector ✔ ✔ ✔ The projected line can be focused by rotating the small red knob on the back of the fixture. Adjust until the line is as thin as possible. There will only be one ideal focus The projector does not have a power switch and will turn position.
- Page 8 VirtuaLine™ PRO LED Line Projector OFFSET MOUNTING This mounting type will distort the WALL MOUNTING This mounting type will distort the line line projection to a conical shape – thinner closest to the projection to an elliptical shape – thicker in the middle, units, wider it moves away.
-
Page 9: Section 4: Troubleshooting
Line is not long enough. Wrong lens fan angle for application. The lens fan angle cannot be changed by the user. Contact Laserglow for assistance. Projected line is very blurry or Focus is not set correctly. -
Page 10: Section 5: Maintenance
VirtuaLine™ PRO LED Line Projector Section 5: Maintenance Laserglow's Virtualine™ LED PRO fixtures require very little maintenance. Depending on the cleanliness of your environment, maintenance may be required with some regularity, or never at all. Inspect the fixture regularly to ensure there is no buildup of debris or dust on the output lens or rear heatsink. -
Page 11: Section 6: Warranty Information
Within North America only, and within the first 30 days of the warranty period, Laserglow will cover the cost of shipping the defective item back to Laserglow and the cost of shipping the repaired/replacement item to the customer. - Page 12 VirtuaLine™ PRO LED Line Projector laserglow.com/industrial OTHER BENEFITS (NON-WARRANTY) THAT ARE ACCORDED TO YOU BY LASERGLOW 10% Replacement/Upgrade Credit: At any time, for the lifetime of the product, you may return the product to us in any condition, functional or not, for a trade-in credit equal to 10% of the original purchase price or 10% of the current retail price, whichever is less.
Need help?
Do you have a question about the VirtuaLine PRO LED Line and is the answer not in the manual?
Questions and answers