Table of Contents
Advertisement
Contents
Connections
Audio
Make audio-related settings.
Filter
This unit is equipped with a sound quality adjusting function which allows
users to enjoy the desired playback sound quality. The unit supports PCM
signal.
Offers a short impulse response for both
pre-echo and post-echo. Large amount of
Filter 1
audio information clearly reproduces deep
(Default):
stereo imaging and the relative position of
the sound source.
This characteristic is known as
asymmetrical impulse response. The post
Filter 2:
echo is slightly longer than the pre-echo.
The sound characteristics is more analog
like.
Front panel
Rear panel
Playback
Settings
Lock Range
Narrowing down the "Lock Range" setting reduces jittering, providing
clearer sound. However, if the "Lock Range" is set too narrow, it may
cause intermittent sounds and noise during playback or when switching to
a song with a different sampling frequency. If this occurs, broaden the
"Lock Range" setting until the music you are listening to sounds normal.
Narrow / Medium / Wide
0 The factory default setting for "Lock Range" differs depending on the input source.
Below are the factory default settings for each input source.
Default
Narrow
Wide
0 A separate "Lock Range" setting is recorded for each input source, except for
"HEOS Music", USB flash drive and Bluetooth, which have a common setting.
97
Remote control
unit
Tips
Input source
CD
HEOS Music / Bluetooth /
USB flash drive playback (USB-A) / USB-DAC /
HDMI / Coaxial / Optical
Index
Appendix
Advertisement
Table of Contents
