Contents
Connections
o Audio Device Settings (macOS only)
A With the unit power off, connect the unit and Mac using a USB cable
(not included).
For the connection procedure, refer to the "Connecting a PC or Mac"
0
section. (v p. 28)
B Press CD X.
C Press USB-DAC to switch the input source to "USB-DAC".
D Move the cursor to "Go" on the computer screen, and then click
"Utilities".
The utility list is displayed.
0
E Double-click "Audio MIDI Setup".
The "Audio Devices" window is displayed.
0
F Secondary click on "CD 50n", and then check that "Use This Device For
Sound Output" is checked.
If a different device is checked, select and secondary click on "CD
0
50n", and then select "Use This Device For Sound Output".
Front panel
Rear panel
Playback
Settings
80
Remote control
unit
Tips
CD 50n
CD 50n
⑥
Index
Appendix