Table of Contents
Advertisement
Contents
Connections
TV
TV Input
Set this when playing audio from a TV on this unit. When the TV is turned
on, this unit turns on and the input source is automatically switched to
"HDMI", "Optical" or "Coaxial" so that the audio from the TV can be played
through this unit.
o Default Input
Set the input source to be used when playing audio from the TV
through this unit. Set this according to the jack on this unit being used
to connect to the TV (HDMI ARC, OPTICAL input or COAXIAL input).
None / HDMI Out (ARC) / Optical In / Coaxial In
(Default: HDMI Out (ARC))
Front panel
Rear panel
Playback
Settings
o Auto-Play
When a TV audio source is input to this unit, the unit automatically
switches to the input source set in "Default Input" and the Auto-Play
function for playing TV audio on this unit is set.
On
(Default):
Off:
0 The Auto-Play function does not work when "Default Input" is set to "None".
0 The Auto-Play function will not work if the sampling frequency of the audio
101
Remote control
unit
Tips
Enables the Auto-Play function.
Disables the Auto-Play function.
Set "Default Input" in advance.
signal input from this unit's OPTICAL input terminal and COAXIAL input
terminal is 88.2 kHz or more. TVs normally output 48 kHz audio signals and
the Auto-Play function will work, but if you connect a device that outputs an
audio signal of 88.2 kHz or more and try to use it, the Auto-Play function may
not work.
Index
Appendix
Advertisement
Table of Contents
