Table of Contents
Advertisement
Contents
Connections
Operations cannot be performed through the remote control unit
Operations cannot be performed through the remote control unit.
Batteries are worn out. Replace with new batteries. (v p. 8)
0
Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 8)
0
Remove any obstacle between this unit and the remote control unit.
0
Insert the batteries in the proper direction, checking the q and w marks. (v p. 8)
0
The unit's remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the
0
remote control sensor will not be exposed to strong light.
When using a 3D video device, the remote control unit of this unit may not function due to effects of infrared communications between units (such as TV
0
and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not
affect operations from the remote control unit of this unit.
When using this unit independently, set the switch to INTERNAL. (v p. 33)
0
Display on this unit shows nothing
Display is off.
Press the DIMMER button, and change the setting to anything other than off. (v p. 89)
0
Front panel
Rear panel
Playback
Settings
116
Remote control
unit
Tips
Index
Appendix
Advertisement
Table of Contents
