Table of Contents
Advertisement
S e t t i n g s
USB data cable
You can use the USB data cable to transfer data between the phone and
a compatible PC or a printer supporting PictBridge. You can also use the
USB data cable with Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the
data cable. Confirm
from the following options:
Nokia mode
— to use the cable for PC Suite
Printing & media
— to use the phone with a PictBridge compatible
printer or with your compatible PC
Data storage
— to connect to a PC that does not have Nokia software
and use the phone as a data storage device
To change the USB mode, select
data cable
>
Nokia
■ Call
Select
Menu
>
Settings
Call divert
— to divert your incoming calls (network service). You may
not be able to divert your calls if some call barring functions are active.
See
Call barring service
Voice clarity
>
Active
noisy environments
Anykey answer
>
On
any key, except the power key, the camera key, the left and right
selection keys, or the end key
Automatic redial
>
the call after an unsuccessful call attempt
Speed dialling
>
On
the speed-dialing keys, 2 to 9, by pressing and holding the
corresponding number key
52
USB data cable connected. Select
Menu
mode,
Printing &
media, or
>
Call
and from the following options:
in "Security," p. 55.
— to enhance speech intelligibility especially in
— to answer an incoming call by briefly pressing
On
— to make a maximum of 10 attempts to connect
— to dial the names and phone numbers assigned to
mode., and select
>
Settings
>
Connectivity
Data
storage.
>
USB
Advertisement
Table of Contents
