Wired Mode; Bluetooth Mode - Razer DEATHSTALKER V2 PRO TENKEYLESS Manual

SETTING UP YOUR RAZER DEATHSTALKER V2
PRO TENKEYLESS
CHARGING
100%
For best results, fully charge your keyboard
before using it for the first time. It takes
approximately 2 hours to fully charge your
keyboard. You may continue using the
keyboard while plugged in.
BATTERY STATUS
COLOR STATUS
Red Critical
Orange Very Low
Yellow Low
Green Charged
2.4 GHZ MODE
1.
2.
OR
If you have a compatible Razer device with 2.4GHz
wireless connectivity, you can do a multi-device
pairing and use the same dongle for both devices. Visit
this link to learn more: https:/ /rzr.to/NAV6xO

BLUETOOTH MODE

1.
2.
5s
3.
 Your keyboard will reconnect to the last paired device after it
has been powered on again.
Display Active Profile
Switching Profiles
 If your system was restarted, press any key (except FN) on
your keyboard to reconnect to the last paired device.

WIRED MODE

1.
2.
 Install Razer Synapse when prompted or download the
installer from razer.com/synapse.