Installing The Software; Installing The Hardware - National Instruments PCMCIA-4050 Getting Started Manual

Installing the Software

Installing the Hardware

Cautions
To prevent damage to the DMM due to electrostatic discharge or contamination, handle the
device using the edges or the metal bracket.
Note Install the NI-DMM software before installing the hardware.
© National Instruments Corporation
Remove the DMM from the package and inspect it for loose components or
any sign of damage. Notify NI if the DMM appears damaged in any way.
Do not install a damaged DMM into your computer or chassis.
Store the DMM in the antistatic envelope when not in use.
Complete the following steps to install the software before installing
the DMM.
1. Install an application development environment (ADE) such as
LabVIEW, LabWindows/CVI, Microsoft Visual C++, or Microsoft
Visual Basic.
2. Install the NI-DMM instrument driver software according to the
instructions on the CD included with your DMM.
You must power off your PC or chassis before installing the DMM.
9 NI Digital Multimeters Getting Started Guide