Table of Contents
Advertisement
Acquiring Data
DMM Soft Front Panel
NI-DMM Instrument Driver
Fuse Replacement
Caution
For continued protection against fire, replace only with fuses of the same type and
rating. Refer to Table 1 for fuse types.
DMM
NI PXI/PCI-4060
NI PXI-4070
© National Instruments Corporation
You can acquire data with the DMM in one of two ways: by using the
DMM Soft Front Panel (SFP) or the NI-DMM instrument driver in your
application.
The DMM SFP is a software representation of a traditional benchtop
DMM. Use the DMM SFP to test the basic functionality of the DMM and
become familiar with its operation.
You can launch the DMM SFP from Program Files»National
Instruments»NI-DMM»NI-DMM Soft Front Panel.
NI-DMM features a set of operations and attributes that exercise all the
functionality of the DMM, including configuration, control, and other
module-specific functions. NI-DMM controls all NI digital multimeters.
Refer to the Programming section of the NI Digital Multimeters Help
at Program Files»National Instruments»NI-DMM»NI Digital
Multimeters Help, for information on using NI-DMM in your
applications.
This section explains how to replace the fuse in the NI 4060 and NI 4070.
Replace the fuse with one of the fuse types listed in the chart below. To
replace the fuse in the CSM-10A or CSM-200ma shunt modules, refer to
the CSM-10A and CSM-200ma Current Shunt Modules Installation Guide.
Table 1. Appropriate Fuses for the NI 4060 and NI 4070
Fuse Rating
Fuse Type
500 mA/250 V
Fast acting
500 mA/250 V
Fast acting
1.25 A/250 V
Fast acting
Manufacturer
Schurter
LittelFuse
LittelFuse
23
NI Digital Multimeters Getting Started Guide
Part Number
FSF 034.1513
217.500
216 1.25
Advertisement
Table of Contents
