Table of Contents
Advertisement
Do not operate the NI PCI-4060 without both insulators replaced and fastened.
Caution
NI PXI-4070
Do not cover the fuse slot on the opposite side of the NI 4070 with your hand,
Caution
as doing so may cause injury.
NI Digital Multimeters Getting Started Guide
1 Glass fuse
Figure 19. Removing the Fuse from the NI PCI-4060
7.
Press the new fuse into the silver holding fixture until you hear a snap.
8.
Reattach the top and bottom covers in the same order as you removed
them.
To replace the fuse, complete the following steps:
1.
Remove all signal connections from the NI 4070.
2.
Power off the chassis and remove the NI 4070.
3.
Locate the fuse hole shown in Figure 20.
4.
Insert a screwdriver into the hole.
5.
Gently press the fuse with the screwdriver until one of the fuse clamps
releases.
1
26
ni.com
Advertisement
Table of Contents
