Advertisement
Install the wall mount shower arm
1. The wall mount shower arm requires a 1/2” male nipple, extending
5/8” from the surface of the finished wall.
2. Wrap the threads on the nipple with
Teflon
thread tape.
TM
3. Screw the shower arm into the female
fitting.
4. Seal the wall with acetic-acid free silicon
bathroom sealant.
Install the shower head
1. Make sure that the self-sealing filter gasket
is installed fully in the ball joint by grasp-
ing the tab and turning clockwise as far as
possible without using force.
2. Screw the showerhead to the shower arm.
3. Turn on the water and check the connec-
tion for leaks.
3
Advertisement
