P Board Adjustments; (Kv-27V15/32V15 Only) - Sony KV-27V10 Service Manual

KV-27V10/27V15
KV-29V10C/29V10M/32V15
RM-Y117 RM-Y121/RM-CM101
RM-YI17 RM-Y117 RM-Y121
RM-CM101
\V.SIZE ADJUSTMENT (vsiz)
1. Input a cross-hatch signal.
2. Set to service adjustment Mode.
3. Select VSIZ with[I]and[4].
4. Adjust with Bland|6|for the best vertical size.
5. Write into the memory by pressing
IMUTING|
IENTER| .
V. SIZE (VSIZ)
V LINEARITY(VLIN), VS CORRECTION(VSCO),
PIN AMP(PAMP), CORNER PIN(CPIN), AND
PIN PHASE(PPHA) ADJUSTMENTS
1. Input a cross-hatch signal.
2. Set to Service adjustment Mode.
3. Select VLIN, VSCO, PAMP, CPIN, and PPHA with{i]
and{].
4. Adjust with B]and|6]for the best picture.
5. Write the memory byPressing |MUTING] then
[ENTER].
V LINEARITY (VLIN) S|
VS CORRECTION (VSCO)
=-E-
PIN AMP (PAMP)
CORNER PIN (CPIN)
PIN PHASE (PPHA)
a
then
5-3. P BOARD ADJUSTMENTS
(KV-27V15/32V15 only)
PIN PH. POSITION (PHPO)
1. Input a color-bar signal
2. Set to Service adjustment Mode.
3. Select PHPO with [IJand [4].
4, Adjust with]and[6|for the best balanced cent
position at 4 corner P in P display position.
5. Write the memory by pressingIMUTING|then
ENTER} .
— 40 —