National Instruments BP-1 Installation Manual

INSTALLATION GUIDE
BP-1 B
ATTERY

Introduction

What Your Kit Should Contain

™
DAQPad , National Instruments
trademarks or trade names of their respective companies.
320814B-01 © Copyright 1994, 2000 National Instruments Corp. All rights reserved.
P
ACK
This guide describes how to use the BP-1 battery pack with any of the
DAQPad Series DAQ devices. The BP-1 battery pack is a portable power
supply for the DAQPad Series DAQ devices.
The BP-1 is a rechargeable battery pack that you can use to power any of
the DAQPad Series DAQ devices instead of the A/C power supply adapter
that is in the DAQPad device kit.
The BP-1 battery pack contains a 12 V sealed lead-acid battery. You can use
the Velcro strap that is in the kit to strap the battery pack and a DAQPad
device together to facilitate carrying and stacking them.
You can use the SCXI-1383 power supply and float charger to
simultaneously charge the battery pack and power the DAQPad device.
Each BP-1 kit contains the BP-1 battery pack, a Velcro strap, and the BP-1
Battery Pack Installation Guide. If your kit is missing any of the
components or if you received the wrong version, contact National
Instruments.
Detailed specifications of the BP-1 battery pack are in the
Pack Specifications
™ ™ ™
, ni.com , and SCXI are trademarks of National Instruments Corporation. Product and company names are
section of this guide.
BP-1 Battery
February 2000