Table of Contents
Advertisement
Quick Links
INSTALLATION GUIDE
SCXI -1382 Battery Pack
™
This guide describes how to install and use the SCXI-1382 battery pack with the SCXI-1000DC chassis.
The SCXI-1382 is a battery pack containing a 12 V sealed lead-acid battery with a capacity of 26 Ah at
a 20 hr rate. This battery pack can power the SCXI-1000DC chassis when other power sources are
unavailable. You can combine the SCXI-1383 with the SCXI-1382 to charge the SCXI-1382 or to
operate in float mode for uninterruptable power to an SCXI-1000DC chassis. The SCXI-1383 is a
constant voltage, current-limited charger.
There are two versions of the SCXI-1382 battery pack kit. One kit requires an SCXI-1383 and one does
not. If the kit contains an SCXI-1383 power supply/float charger, refer to the SCXI-1383 Power
Supply/Float Charger Installation Guide and Specifications document when setting up the system.
The most recent versions of all National Instruments documents are available for download at
.
manuals
Conventions
The following conventions are used in this guide.
Note
This icon denotes a note, which alerts you to important information.
Caution
This icon denotes a caution, which advises you of precautions to take to avoid injury, data
loss, or a system crash. When this symbol is marked on the product, refer to the Read Me First: Safety
and Electromagnetic Compatibility document, shipped with the product, for precautions to take.
ni.com/
Advertisement
Table of Contents
Related Manuals for National Instruments SCXI-1382
Summary of Contents for National Instruments SCXI-1382
- Page 1 This guide describes how to install and use the SCXI-1382 battery pack with the SCXI-1000DC chassis. The SCXI-1382 is a battery pack containing a 12 V sealed lead-acid battery with a capacity of 26 Ah at a 20 hr rate. This battery pack can power the SCXI-1000DC chassis when other power sources are unavailable.
- Page 2 Recommended, sold separately with country-appropriate power cord options – SCXI-1383 power supply/float charger Before using the SCXI-1382 battery pack for the first time, charge it for at least 24 hours to reach the full charge capacity. Refer to the Charging the Battery Pack section for charging instructions.
- Page 3 Charging the Battery Pack The SCXI-1382 battery pack requires 12 to 14 VDC and at least 3.7 A of power for at least 12 to 14 hours to reach a full charge. Charge the battery pack as soon as possible after use. If the battery is fully charged, it can power the SCXI-1000DC chassis for more than five hours.
- Page 4 Always power off the SCXI-1000DC and the SCXI-1383 before connecting or disconnecting to each other or to the SCXI-1382. To connect the SCXI-1383 power supply/float charger to the SCXI-1000DC and the SCXI-1382 battery pack in float-charging mode, complete the following steps while referring to Figures 1 and 2:...
- Page 5 SCXI-1382 Battery Pack SCXI-1383 Power Supply/Float Charger To VAC Power Source Figure 2. Connecting the SCXI-1382 in the Float-Charging Mode to the SCXI-1000DC Chassis and the SCXI-1383 Power Supply/Float Charger Specifications All specifications are typical at 25 °C unless otherwise specified.
- Page 6 Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for this product, visit ni.com/ , search by model number or product line, and click the appropriate link in the certification Certification column. SCXI-1382 Battery Pack Installation Guide ni.com...
- Page 7 Waste Electrical and Electronic Equipment (WEEE) EU Customers At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instruments WEEE initiatives, visit ni.com/environment/weee National Instruments...
Need help?
Do you have a question about the SCXI-1382 and is the answer not in the manual?
Questions and answers