GE PFSF5NFWBB Owner's Manual And Installation Instructions page 24

INSTALLING THE REFRIGERATOR
LEVEL THE REFRIGERATOR
10
The leveling legs have 2 purposes:
1) Leveling legs adjust so the refrigerator
is firmly positioned on the floor and
does not wobble.
2) Leveling legs serve as a stabilizing
brake to hold the refrigerator securely
in position during operation and
cleaning. The leveling legs also prevent
the refrigerator from tipping.
A Remove the grille by removing the two
Phillips head screws.
B
Turn the leveling legs clockwise to raise the
refrigerator, counterclockwise to lower it.
CAUTION:
personal injury or property damage, the
leveling legs must be firmly touching
the floor.
C Replace the base grille by inserting the two
Phillips head screws.
Installation Instructions
To avoid possible
(cont.)
SET THE CONTROLS
11
Set the controls to the recommended
setting.
REMOVE PACKAGING
12
START ICEMAKER
(icemaker models)
A) Remove all tape, foam and protective
packing from shelves and drawers.
B) Remove the tie downs from the freezer
baskets.
C) Place half width basket onto drawer
slides. See About the freezer section
for instructions.
Set the icemaker power switch to the
I (on) position. The icemaker will not
begin to operate until it reaches its
operating temperature of 15°F (–9°C)
or below. It will then begin operation
automatically. It will take 2–3 days to
fill the ice bin.
Power
switch
NOTE:
In lower water pressure conditions, the
water valve may turn on up to 3 times
to deliver enough water to the icemaker.
24