Operating A Cable Box Or Dbs Receiver; Setting The Manufacturer's Code - Sony Trinitron KV-29VX2 Operating Instructions Manual

Operating a Cable Box or DBS Receiver

Setting the Manufacturer's
Code
You can program the supplied remote control
to operate a cable box or DBS receiver.
1
Turn off the equipment you want to set
up, and press DBS/CABLE (FUNCTION).
FUNCTION
DBS/CABLE
2
Press CODE SET, DBS/CABLE
(FUNCTION), the 0-9 buttons to enter the
manufacturer's code number (see the
following chart), then press ENTER.
For example, to operate a Sony DBS
receiver:
FUNCTION
CODE SET DBS/CABLE
8
3
Press DBS/CABLE (POWER) to turn on
the cable box or DBS receiver.
DBS/CABLE
34
4
Use the cable box/DBS control buttons to
check if the code number works.
For example, to operate a cable box or DBS
receiver, you can use the DBS/CABLE
(POWER), JUMP, CH +/–, 0 - 9 and ENTER
buttons.
Note
• If the cable box or DBS receiver does not
have a certain function, the corresponding
button on this remote control will not
operate.
Manufacturer code numbers
(cable box)
Manufacturer
Hamlin/Regal
Jerrold/G. I.
ENTER
1
0 Oak
Panasonic
Pioneer
Scientific Atlanta
Tocom
Zenith
Manufacturer code numbers
(DBS receiver)
Manufacturer
Sony
RCA/PROSCAN
To operate the TV
Press TV (FUNCTION). Then use the TV
control buttons to control the TV.
For more details on operating the
cable box or DBS receiver
Refer to the operating instructions that come
with the equipment.
Code
222, 223, 224, 225, 226
201, 202, 203, 204, 205,
206, 207, 208, 218
227, 228, 229
219, 220, 221
214, 215
209, 210, 211
216, 217
212, 213
Code number
801 (preset code for
remote control)
802