Using This Appliance - Iceking RL550W.E Installation And Operating Manual

Turning On.
• Turn the thermostat knob to the "4" position, plug in and turn on
electricity. The compressor will begin to run.
• Open the door 30 minutes later, if the temperature in the refrigerator
has decreased obviously, it shows that the refrigerator system is
working.
• When the refrigerator operates for a period of time, the temperature
controller will automatically set the temperature within the appliance
according to the number it has been set on.
Temperature Control
The temperature of the appliance can be adjusted by turning the
thermostat dial. The thermostat can be set between 1 and 7.
• 1 is the warmest setting.
• 7 is the coldest setting.
• Set the dial to OFF to turn off the cooling function.
• Under the normal operating condition (in spring and autumn), it is recommended
to set the temperature at 4 .
• In summer when the ambient temperature is high, it is
recommended to set temperature at 3-4 , so as to guarantee the fridge and
freezer temperatures and reduce the refrigerator continuous running time; and
in winter when the ambient temperature is low, it is recommended to set
temperature at 5-6 to avoid frequent start/stop of the refrigerator.
Notes:The temperatures may vary with respect to setting's due to
compressor cycles and outside conditions.
Notes: The thermostat setting of '6' or '7' is suitable when the ambient
temperature is under 16 °C, but it may lead to ice formation if the refrigerator
keeps running at such a high setting for a long time under the normal ambient
temperature, this would be a normal phenomenon. In such case, it is
recommended to adjust back the thermostat setting appropriately.

Using This Appliance

15