Troubleshooting - Miele HS23 Operating Instructions Manual

Troubleshooting

Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
the Miele Customer Service Department.
Information to help you remedy faults yourself can be found at www.miele.com/
service.
The following tables are designed to help you to find the cause of a malfunction or
a fault and to resolve it.

Risk of injury caused by rotating roller brush.
You can injure yourself on the rotating roller brush.
Switch the vacuum cleaner off before dealing with any problems. Use the On/
Off switch on the handle to do this.
Problem
Battery charging state
indicator when switch-
ing on: left and middle
indicators flash rapidly
LED on the handle is
flashing
Cause and remedy
Temperature fault
 Wait for approximately 30 minutes before switch-
ing the vacuum cleaner back on again.
"Battery is discharged" fault
 Charge the battery (see "Commissioning" – "Gen-
eral battery information" and "Charging the bat-
tery").
Internal system error
 Check the vacuum cleaner airways for any block-
ages.
 Clean the dust container, pre-filter and fine dust fil-
ter (see "Cleaning and care").
 Wait for approximately 30 minutes before switch-
ing the vacuum cleaner back on again.
en
59