Plot Controls - Ossila T2003 User Manual

Solar Cell I-V Test System

9.10 Plot Controls

(I) Position Readout
Whilst the mouse cursor is over the plot in the Characterisation and Stabilised Current tabs,
the x and y position of its location are displayed in the bottom-right of the plot, as shown in
Figure 9.16.
Figure 9.16. Readout of the voltage and current density at the mouse cursor location in the
(II) Plot Display Controls
By default, the axes of the plot will automatically scale to display all the data within it. The view can
be controlled manually using the following mouse controls:
Left/Middle click and drag – pan the axes.
•
Right click and drag – scale the axes (left-right for x-axis, up-down for y-axis).
•
Scroll wheel – scale the axes centred on the cursor location.
•
A specific axis can be controlled by using these controls on the axis labels. The axes can be reset
by clicking the 'A' button in the bottom-left of the plot, as shown in Figure 9.17.
www.ossila.com
Characterisation tab.
Figure 9.17. Button to reset the plot axes.
25
User Manual
Ossila Limited © 2023