Changing Basic Settings; Home Connect - Siemens SN23HC65MM Information For Use

Basic setting
Remote Start
Cleaning nozzle
Factory setting
1
Factory setting (may vary according to model)
15.2 Changing basic settings
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Press ⁠ .
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows Hxx.
a The display shows
Display text Selection
rc1 rc0 - rc2
1
FC0 FC0 - FC1
rE Start with
YES
Confirm with
⁠ .
Description
Activate or deactivate
→ "Remote Start ",
Page 37.
The following settings are
possible:
¡ With the setting "rc0", the
function is permanently
deactivated.
¡ With the setting "rc1", the
function can be selected
via the
→ "Activating Remote
Start ", Page 37
¡ With the setting "rc2", the
function is permanently
activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→ "Home Connect ",
Page 36
Activate "FC1" or deactivate
"FC0" the cleaning nozzle for
the filter system.
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
Press
3.
the display shows the required set-
ting.
Press repeatedly until the dis-
4.
play shows the right value.
You can change several settings.
To save the settings, press
5.
for 3 seconds.
Basic settings en
button.
repeatedly until
35