Advertisement
® When the drawer is cinnected.
Fig. 3-13
® When the drawer is separated,
Fig. 3-14
® Replacement of the decolation panel.
Strip off the carrent mode switch panel and affix the mode
switch panel (HDECA6310RCZZ) in place of the old one.
Fig. 3-15
@ Remove the clerk Key hole cover located at the front and right
side of the top cabinet.
—40—
@ Install the top cabinet
@ Install the real key cover (GFTAB6754RGZA) to the top
cabinet.
Fig. 3-16
3-6. Drawer bell and open sensor kit
3-6-1. Drawer bell kit
1) Parts list
DKIT-8324RCZZ
Parts code
Desoription
[Price rank| City
OAGRAL202MKSS | Bell
[ac
1
OAGMLF230MKSS | Hammer unit
[ac
1
OAGXBD806406N
| Screw M4 x6
[AA
$
OAGXBD801408W | Screw M4 x8
AA
1
2) installation procedure
© Remove the drawer bottom plate by unscrewing the 4-screws,
® Instalt each component-1 to 4 as illustrated in Fig. 3.
Fig. 3-17
36-2. Drawer open sensor kit
;
1) Parts list
DKIT-8325RCZZ
No.
Parts code.
Description.
. .|Price rank}
Q'ty
5
|QCNCM5035BCZZ | 2-pin.connector.
AB.
1
6
|OAGPSP200MKSS | Spacer
AB
1
7.
|OAGQCW230MKSS]2-pin connector with wire:
AE.
1
8
|OAGXBD202314X | Screw M3 x 14
BA
a
9
|0AGQSW201MKSS|
Micro'switch
"AM
1
Note: The 2-pin connector (No.5) has been already installed for
the models ER-1910 and ER-1920. Therefore, skip the
steps @ and @ in the installation procedure. And the 2-pin
connector is not used in this case.
Advertisement
