Sony ICF-SW7600 Operating Instructions Manual page 12

Lw/mw/sw/fm stereo pll synthesized receiver

Hide thumbs Also See for ICF-SW7600:

Preset Tuning

1 Set POWER/LOCK to POWER.

2 Press ON/OFF.

3 Press a desired PRESET/DIRECT TUNING button.

The preset station will be tuned in.

To check the preset station

Press PRESET/DIRECT TUNING while pressing BAND. The frequency of the

preset station is displayed. You can check anytime even if another station is

tuned in.

To change the preset station

Store a station on a desired PRESET/DIRECT TUNING button. The station

previously stored on the button is erased.

How to Tune in Precisely

—

Using the FINE TUNING control

AM MODE

FINE TUNING

FINE

nomme 4 F5="y0t

= Sle +

OO00

2 0000

This radio receives the station at the interval of frequency

shown in the list on pages @ and @. To receive a station

whose frequency does not coincide with this interval, it is

necessary to adjust the tuning in approx.

+5 kHz range

by FINE TUNING. In this case, the frequency display will g

not change.

1 Set AM MODE to FINE.

2 Adjust the tuning with FINE TUNING.

+: For a frequency up to approx. 5 kHz higher

—: For a frequency up to approx. 5 kHz lower

<a toe

moiisinek

N a c i n a

artan» eirio

Note

FM band cannot be adjusted with FINE TUNING.