Table of Contents
Advertisement
VIVOTEK
Auto: If you set Exposure mode as Auto, the Exposure time and Gain control will not be
configurable since the sensor library will automatically adjust the value according to the ambient
light. Then you can configure iris mode as "indoor" or "outdoor" to reach the best image quality.
■ Iris mode: Select Indoor or Outdoor iris mode to adapt to the installation. The preset iris aperture
setting will apply. Note that on a fixed lens model, this option is not configurable.
You can click Restore to recall the original settings without incorporating the changes. When
completed with the settings on this page, click Save to enable the settings.
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to
open the Profile of exposure settings page as shown below.
Activated period: Select the mode this profile to apply to: Day mode, Night mode, or Schedule
mode. Please manually enter a range of time if you choose Schedule mode. Then click Save for the
configuration to take effect.
Please follow the steps below to set up a profile:
1. Select the Profile mode tab.
2. Select the applicable mode: Night mode or
Schedule mode. Please manually enter a
range of time if you choose Schedule mode.
3. Configure Exposure control settings in the
folowing columns. Please refer to previous
dicussions for detailed information.
4. Click Save to enable the setting and click
Close to exit the page.
NOTE:
Note that when the WDR Pro function is enabled,
the Measurement window is not configurable.
■ WDR Pro:
This refers to the Wide Dynamic Range function that enables the camera to capture details in
a high contrast environment. Use the checkbox to enable the function, and use the slide bar
to select the strength of the WDR Pro functionality, depending on the lighting condition at the
installation site. You can select a higher effect when the contrast is high (between the shaded
area and the light behind the objects).
Enable WDR enhanced: This function allows users to identify more image details with an extreme
contrast from an object of interest with one shadowed side against a bright background, e.g., an
entrance. You may select the Enable WDR enhanced checkbox, and then adjust the strength (low,
medium, high) to reach the best image quality.
58 - User's Manual
Advertisement
Table of Contents
