Table of Contents
Advertisement
VIVOTEK
gammacurve
lowlightmode
<product dependent>
dnr_mode
<product dependent>
dnr_strength
<product dependent>
defog_mode
<product dependent>
defog_strength
<product dependent>
eis_mode
<product dependent>
eis_strength
<product dependent>
190 - User's Manual
0~100
4/4
<boolean>
4/4
<boolean>
4/4
1~100
4/4
<boolean>
4/4
1~100
4/4
<boolean>
4/4
1~100
4/4
"capability_image_c<n>_basicsetting" is 1
0: Fine-turned gamma curve by Vivotek.
1: Gamma value = 0.01
2: Gamma value = 0.02
3: Gamma value = 0.03
...
100: Gamma value = 1
* Note: Although we set gamma value to 100
level, but not all gamma values are valid.
Internal module will take the closest valid one.
For example, 1~45 may all be mapped to
gamma value = 0.45, etc.
Enable/disable low light mode.
* Only available when
"capability_image_c<n>_lowlightmode" is 1
3D noise reduction.
0:disable
1:enable
* Only available when
"capability_image_c<n>_dnr" is 1
Strength of 3DNR
* Only available when
"capability_image_c<n>_dnr" is 1
Enable/disable defog mode.
0:disable
1:enable
* Only available when
"capability_image_c<n>_defog_mode" is 1
Strength of defog
* Only available when
"capability_image_c<n>_defog_mode" is 1
Electronic image stabilizer
0:disable
1:enable
* Only available when 'eis' is listed in
"capability_image_c<n>_is_mode".
Strength of electronic image stabilizer
* Only available when 'eis' is listed in
"capability_image_c<n>_is_mode".
Advertisement
Table of Contents
