Vivotek TD5328-VF2 User Manual page 217

nanystream
iva
whitelight
iris
supportsd
fisheye
tampering
tamperingmode
adaptiverecording
adaptivestreaming
supporttriggertypes
0, <positive 0/7
integer>
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
tamper,toodark,toob 0/7
right,tooblurry
<boolean> 0/7
<boolean> 0/7
seq,boot,motion,net 0/7
workfail,recnotify,ta
mpering,vi,vadp,di,
volalarm,temperatu
re,pir, visignal,
backup
<product
dependent>
2nd bit of the group indicates 2nd stream of a
channel support ePTZ or not, and so on.
* For most products, the last stream of a
channel will not support ePTZ. It is reserved
for full view of the channel. For some
dual-stream products, both streams support
ePTZ.
number of any media stream per channel
Indicate whether to support Intelligent Video
analysis
Indicate whether to support white light led.
Indicate whether to support iris control.
Indicate whether to support local storage.
The parameter is used to determine whether
the product is fisheye or not.
Indicate whether to support tampering
detection.
Available tampering mode list.
* Only available when "capability_tampering"
is 1.
Indicate whether to support adaptive
recording.
Indicate whether to support adaptive
streaming.
list all the trigger types which are supported in
the camera:
"seq" = Periodic condition
"boot" = System boot
"motion" = Video motion detection
"networkfail" = network connection failure
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi" = Virtual input (Manual trigger)
"vadp" = VADP trigger
"di"= Digital input
"volalarm" = Audio detection
"temperature" = Temperature detection
VIVOTEK
User's Manual - 217