Programs Table - IKEA LAGAN Manual

Hide thumbs Also See for LAGAN:

Manual (506 pages)

Installation instructions manual (160 pages)

User manual (64 pages)

Table Of Contents

Table of Contents

Available languages

button and within 4 seconds close the door: the timer

The start time of the program may be delayed for a period

ENGLISH

will begin counting down.

of time between 1 and 12 hours.

3. Once this time has elapsed, the indicator light «h»

1. Press the DELAY button: the corresponding «h» symbol

switches off and the wash cycle begins.

DELAY

appears on the display; each time you press the button,

To adjust the delay time and select a shorter period of time,

ENGLISH

The start time of the program may be delayed for a period

the time (1h, 2h, etc. up to max. 12h) from the start of

press the DELAY button. To cancel it, press the button

of time between 1 and 12 hours.

the selected wash cycle will be increased.

repeatedly until the selected delayed start indicator light

1. Press the DELAY button: the corresponding «h» symbol

2. Select the wash program, press the START/PAUSE

«h» switches off.

DELAY

appears on the display; each time you press the button,

button and within 4 seconds close the door: the timer

The DELAY function cannot be set once a wash cycle

The start time of the program may be delayed for a period

the time (1h, 2h, etc. up to max. 12h) from the start of

will begin counting down.

has been started.

of time between 1 and 12 hours.

Programs table

the selected wash cycle will be increased.

3. Once this time has elapsed, the indicator light «h»

1. Press the DELAY button: the corresponding «h» symbol

2. Select the wash program, press the START/PAUSE

switches off and the wash cycle begins.

appears on the display; each time you press the button,

To adjust the delay time and select a shorter period of time,

button and within 4 seconds close the door: the timer

the time (1h, 2h, etc. up to max. 12h) from the start of

will begin counting down.

press the DELAY button. To cancel it, press the button

the selected wash cycle will be increased.

3. Once this time has elapsed, the indicator light «h»

repeatedly until the selected delayed start indicator light

Program

2. Select the wash program, press the START/PAUSE

«h» switches off.

switches off and the wash cycle begins.

button and within 4 seconds close the door: the timer

To adjust the delay time and select a shorter period of time,

The DELAY function cannot be set once a wash cycle

will begin counting down.

press the DELAY button. To cancel it, press the button

has been started.

3. Once this time has elapsed, the indicator light «h»

repeatedly until the selected delayed start indicator light

Eco

switches off and the wash cycle begins.

«h» switches off.

1 Eco

The DELAY function cannot be set once a wash cycle

To adjust the delay time and select a shorter period of time,

has been started.

press the DELAY button. To cancel it, press the button

Conventional

repeatedly until the selected delayed start indicator light

wash and dry

«h» switches off.

2 Fast Wash 40'

The DELAY function cannot be set once a wash cycle

Intensive

has been started.

Eco

3 Intensive

Fast

Conventional

Sanitizing

wash and dry

Eco

4 Mixed

Intensive

Pre-Wash

Conventional

wash and dry

Eco

5 Glass

Fast

Self-Clean

Intensive

Conventional

Sanitizing

wash and dry

Fast

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Intensive

Pre-Wash

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:

address: dw_test_support@whirlpool.com

Sanitizing

dw_test_support@whirlpool.com

Pre-treatment of the dishes is not needed before any of the programs.

Fast

Self-Clean

Pretreatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

*) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as

Pre-Wash

**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many

temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional

Sanitizing

factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of

selected options and sensor calibration.

load, load balancing, additional selected options and sensor calibration.

Self-Clean

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.

Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W

Pre-Wash

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following

1. ECO - Eco program is suitable to clean normally soiled tableware, that for this use, it is the most efficient program in terms of its combined

address: dw_test_support@whirlpool.com

energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.

PROGRAMS DESCRIPTION

Pre-treatment of the dishes is not needed before any of the programs.

2. FAST WASH 40' - Program for limited quantity of normally soiled crockery. Ensures optimal cleaning performance in shorter time.

Self-Clean

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.

*) Not all options can be used simultaneously.

3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following

**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many

items).

address: dw_test_support@whirlpool.com

factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of

4. MIXED - Mixed soil. For normally soiled dishes with dried food residues.

Pre-treatment of the dishes is not needed before any of the programs.

load, load balancing, additional selected options and sensor calibration.

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.

5. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.

*) Not all options can be used simultaneously.

Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following

**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many

address: dw_test_support@whirlpool.com

factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of

PROGRAMS DESCRIPTION

Pre-treatment of the dishes is not needed before any of the programs.

load, load balancing, additional selected options and sensor calibration.

*) Not all options can be used simultaneously.

Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W

**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many

factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of

PROGRAMS DESCRIPTION

load, load balancing, additional selected options and sensor calibration.

Modifying a running program

Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W

If a wrong program was selected, it is possible to change it, provided that it has only just begun: open the door, press and hold the ON/OFF

PROGRAMS DESCRIPTION

button, the machine will switch off. Switch the machine back on using the ON/OFF button and select the new wash cycle and any desired

options; Start the wash cycle by pressing START/Pause button and closing the door within 4 sec.

If it takes more than 4 seconds the appliance automatically pauses and you must restart the appliance again by repeating the last operation.

Adding extra crockery

Without switching off the machine, open the door (START/Pause led starts blinking) (be aware of HOT steam!) and place the crockery inside the

dishwasher. Press the START/Pause button and close the door within 4 sec., the cycle will resume from the point at which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power cut, the cycle pauses. Press the START/Pause button and close the door within

4 sec., the cycle will resume from the point at which it was interrupted.

Drying

Program

phase

50°

55°

45°

Program

65°

50°

65°

Program

50°

55°

65°

50°

55°

Program

65°

55°

50°

45°

50°

65°

55°

65°

50°

65°

50°

65°

To download the full version visit www.ikea.com

added together with the dishwasher. To see how to mount protec-

tion foil please refer to (INSTALLATION GUIDE).

NaturalDry

NaturalDry functionality could be disabled by the user as follows:

1. Go to the Dishwasher software menu pressing and holding

Door opening system NaturalDry is a convection drying system

button (6 sec).

which automatically opens the door during/after drying phase to

2. You switched to NaturalDry Control Menu, you could change

ensure exceptional drying performance every day. Door opens at

NaturalDry

status of NaturalDry functionality by pressing

the temperature that is safe to your kitchen furniture.

– enabled

As additional steam protection, special designed protection foil is

Door opening system NaturalDry is a convection drying system

To confirm the change and exit from the Control Menu please

which automatically opens the door during/after drying phase to

added together with the dishwasher. To see how to mount protec-

press and hold

tion foil please refer to (INSTALLATION GUIDE).

ensure exceptional drying performance every day. Door opens at

NaturalDry

NaturalDry functionality could be disabled by the user as follows:

the temperature that is safe to your kitchen furniture.

1. Go to the Dishwasher software menu pressing and holding

As additional steam protection, special designed protection foil is

Door opening system NaturalDry is a convection drying system

added together with the dishwasher. To see how to mount protec-

button (6 sec).

which automatically opens the door during/after drying phase to

2. You switched to NaturalDry Control Menu, you could change

ensure exceptional drying performance every day. Door opens at

tion foil please refer to (INSTALLATION GUIDE).

Duration of

status of NaturalDry functionality by pressing

NaturalDry functionality could be disabled by the user as follows:

the temperature that is safe to your kitchen furniture.

wash program

Available

wash pro-

– enabled

1. Go to the Dishwasher software menu pressing and holding

As additional steam protection, special designed protection foil is

To confirm the change and exit from the Control Menu please

button (6 sec).

(h:min)*)

options

added together with the dishwasher. To see how to mount protec-

press and hold

tion foil please refer to (INSTALLATION GUIDE).

2. You switched to NaturalDry Control Menu, you could change

(h:min)

status of NaturalDry functionality by pressing

NaturalDry functionality could be disabled by the user as follows:

– enabled

1. Go to the Dishwasher software menu pressing and holding

3:35

To confirm the change and exit from the Control Menu please

button (6 sec).

press and hold

2. You switched to NaturalDry Control Menu, you could change

Duration of

status of NaturalDry functionality by pressing

Available

wash pro-

– enabled

0:40

To confirm the change and exit from the Control Menu please

options

press and hold

(h:min)

Duration of

Available

wash pro-

2:40

options

(h:min)

Duration of

Available

wash pro-

2:15

options

(h:min)

1:40

button:

– disabled

button (3 sec).

Water

button:

Water

consumption

– disabled

consumption

gram

(litres/cycle)

(kWh/cycle)

(litres/cycle)

(kWh/cycle)

button (3 sec).

**)

button:

– disabled

2:45

12.0

9.5

button (3 sec).

2:00

15.0

button:

Water

– disabled

9.0

consumption

gram

(litres/cycle)

(kWh/cycle)

2:30

15.0

button (3 sec).

**)

Water

2:45

12.0

18.0

consumption

0:55

11.5

gram

(litres/cycle)

(kWh/cycle)

**)

2:00

15.0

Water

1:40

11.5

2:45

12.0

16.0

consumption

gram

(litres/cycle)

(kWh/cycle)