Panasonic Digital Palmcorder PV-DV951 Operating Instructions Manual page 32

Hide thumbs Also See for Digital Palmcorder PV-DV951:
Table of Contents

Advertisement

MW Playing Back with Multi-Picture Mode
Strobe Multi-Picture Mode [STROBE] @:
You can capture 9 consecutive still pictures from playback images.
Manual Multi-Picture Mode [MANUAL] @:
Selecting a desired still picture one at a time, you can capture 9 still pictures.
Index Multi-Picture Mode ([PHOTO], [SCENE]) €):
You can capture 9 screens of pictures to which index signals are attached.
After setting [EFFECT SELECT] on the [DIGITAL EFFECT] Sub-Menu to
[MULT)).....
1
Set [MULTI-PICTURES] >> [SCAN MODE] >> [STROBE] or
[MANUAL] or [PHOTO] or [SCENE], whichever mode you
preter.
When [STROBE] is selected:
e Set the [SPEED] to a desired strobe speed.
[FAST]:
You can capture 9 consecutive still pictures within
approximately 1 second
:
[NORMAL]:
You can capture 9 consecutive still pictures within
approximately 1.5 seconds
[SLOW]:
You can capture 9 consecutive still pictures within
approximately 2 seconds
e |f you set [SWING] on the [MULTI-PICTURES] Sub-Menu to [ON], the
intervals at which the 9 still pictures are taken are longer at the
beginning and end than in the middle of the swing strobe period, and it
is useful for analyzing swing motion, etc., in sports.
2
Exit the Menu by pressing the [MENU] Button.
3
Play back the tape.
e lí you select Index mode, it is not necessary to play back the tape.
4
Press the [MULTI] Button.
e If [STROBE] is selected: 9 screens are automatically captured from
the point at which the Button is pressed.
e|f [MANUAL] is selected: press the [MULTI] Button at each scene you
want to capture.
When 9 screens are captured, the tape will stop.
elf [PHOTO] or [SCENE] is selected: From the point at which the
Button is pressed, 9 screens of pictures to which index signals are
attached are captured in the playback direction. After 9 screens are
captured, the tape will stop, but, if there are 8 or less pictures to be
captured, the tape will stop at its end.
Deleting All the Captured Multi Pictures
While displaying the multi-pictures that have been captured, press the
[MULTI] Button.
elf [MANUAL] has been selected, press [MULTI] Button after 9 screens are
displayed.
To Display the Multi-pictures again
Press the [MULTI] Button for 1 second or longer.
To Delete Muiti-pictures one by one (When Pictures have been
captured in Manual Mode):
When the [MULTI] Button is pressed for 1 second or longer while the still
pictures are displayed, the picture that was captured last is deleted. If you
continue to press the Button, the pictures are deleted consecutively.
e After still pictures are deleted one at a time, they cannot be displayed again.
To Stop Capturing Pictures midway (When Pictures have been
captured in Index Mode)
Press the [M] Button.
To Search the tape position of a desired picture among the
playback pictures displayed on 9 screens
T After displaying pictures in Multi Picture Mode, rotate the
[PUSH] Dial to select the image whose tape position you
want to search.
e The selected picture blinks at the red frame.
2 Press the Remote controller's index Button [:««] or [>>] €).
e A still picture playback takes place at the selected picture.
e For other notes, see page 53.
For assistance, please call : 1-800-211-PANA(7262) or
send e -mail to : consumerproducts
@ panasonic.com

Advertisement

Table of Contents
loading

Table of Contents