Table of Contents
Advertisement
The mainboard supports three kinds of system boot up: the Boot-Up by
switch, Immediate Boot-Up, and Last State. With the Boot-Up by Switch, the
system will boot up only when the power on switch is pressed. For
Immediate Boot-Up, the system will boot up instantly when the power
connector is connected into the system. This function must be set in the
BIOS Power Management. With Last State, the BIOS will record the last
status the system was in: either System on or Shut down. The next time you
boot up, the system will retain the last system status. This function must be
set at the BIOS Power Management Setup.
Table 2.18: Power On Mode Feature
J8
Note: Short J8, when using Boot-Up by Switch feature. Open J8, to enable
Immediate Boot-Up or Last State.
Feature
Select Boot-Up by Switch
Select Immediate Boot-Up/
Select Last State
2-39
J8
Advertisement
Table of Contents
