Advertisement
e How to remove the automatic mechanism plate
1. Separate
the main
base from
the cabinet.
(Refer to
¥—®
"How to remove the main base and cabinet"'.)
|
2. Remove
the drive circuit P.C.B. and the stator frame.
(Refer to "How
to remove the drive circuit P.C.B. and
stator frame"'.)
3. Remove
the arm
base.
(Refer to "How to remove the
:
arm base and tonearm".)
;
tO
4. Remove the mechanism plate setscrews @ ~ 9. Then,
the mechanism plate can be removed.
(See Fig. 8)
Automatic mechanism
plate
e How to replace the electric parts
1. Remove the panel cover.
(Refer to ''How to remove the
main base and cabinet''.)
2. Remove the drive circuit P.C.B. setscrews @) ~ @ and
connectors @
~
@.
Remove the drive circuit P.C.B.
by lifting it as shown by the arrow.
Then, the electric
parts can be replaced. (See Fig. 9)
To replace the regulator transistor (03), the stator frame
must be removed beforehand.
Fig. 9
m REPLACEMENT OF HALL ELEMENT
Hall element
Fig. 10
Advertisement
