Advertisement
Do you have a question about the SL-1400MK2 and is the answer not in the manual?
Repair cuing lever
To repair the cueing lever on a Technics SL-1400MK2:1. Identify the Fault: The cueing lever issue is common and may be due to a broken plastic part or worn bushing.2. Obtain Replacement Parts: Thanks to 3D printing, replacement parts are available. Determine the correct bushing type before ordering.3. Disassemble the Mechanism: - Remove the clip and spring. - Carefully lift the cam off the shaft.4. Handle Small Components: Be cautious as small parts like needles and springs may fall out during disassembly.5. Install the New Part: Replace the broken plastic piece or bushing with the new one.6. Reassemble and Test: Reassemble the mechanism, ensuring all components are correctly positioned, then test the cueing function.If unsure, consider a professional repair service.
This answer is automatically generated
Need help?
Do you have a question about the SL-1400MK2 and is the answer not in the manual?
Questions and answers
Repair cuing lever
To repair the cueing lever on a Technics SL-1400MK2:
1. Identify the Fault: The cueing lever issue is common and may be due to a broken plastic part or worn bushing.
2. Obtain Replacement Parts: Thanks to 3D printing, replacement parts are available. Determine the correct bushing type before ordering.
3. Disassemble the Mechanism:
- Remove the clip and spring.
- Carefully lift the cam off the shaft.
4. Handle Small Components: Be cautious as small parts like needles and springs may fall out during disassembly.
5. Install the New Part: Replace the broken plastic piece or bushing with the new one.
6. Reassemble and Test: Reassemble the mechanism, ensuring all components are correctly positioned, then test the cueing function.
If unsure, consider a professional repair service.
This answer is automatically generated