Kenwood KDC-3011 Instruction Manual page 23

Projections
temoving the Faceplate:
Press the release button.
The faceplate is unlocked, allowing you to detach it.
NOTE |
* The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case while detached.
Gas, Ay
* Do not expose the faceplate or its storage case to direct
sunlight or excessive heat or humidity. Also avoid places with
too much dust or the possibility of water splashing.
teattaching the Faceplate:
1 Align the projections on the unit with the grooves on the
faceplate.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
— 23 —