Panasonic NV-HD675 Series Operating Instructions Manual page 33

Checking a Timer Programme
¢ The VCR must be turned on, or the timer recording
indicator "(q)' lit.
® Confirm that the TV is on and the VCR viewing channel is
selected.
Press PROG./CHECK twice.
PROG,CHECK)
cam)
Cancelling a Timer Programme
@ The VCR must be turned on, or in timer recording standby
mode.
© Confirm that the TV is on and the VCR viewing channel is
selected.
1 Press PROG/CHECK twice.
PROG CHECK
CO
2 Press PROGJCHECK repeatedly
until the desired timer programme / #
number flashes on and off.
PROG./CHECK
C)
3 Press CANCEL.
Note:
lf timer recording is not completed (due to insufficient tape
or cancellation by the user), the programmed timer
recording data will be cancelled from the memory by
4 A.M. two days later.
However, if, at that time, the timer recording function is
activated, the programmed timer recording data will not be
cancelled.
%
©
a]
—
©
S
1e)
xs)
a)
iS)
S
S
S
<=
33