Panasonic NV-HD675 Series Operating Instructions Manual page 10

Tuning the TV to yo
1,2
The VCR supplies a signal to the TV via the RF coaxial
cable on channel AU28-69, or NZ21-69.
It is possible to view the video picture on your TV in the
same way that you watch TV broadcasts.
If you have connected the VCR to the TV through the video
and audio input sockets, then you do not need to follow the
procedure below.
When the VCR is turned on after unpacking and
connecting the aerial cable and the mains lead, Plug in
Auto Tuning starts automatically.
(NV-HD675EA only)
Notes:
® If the VCR is turned on with the aerial not connected, all
channels are skipped. Therefore, firmly connect the aerial
and then turn the VCR off and on again to execute Auto
Tuning,
Operations
1
Geert wow
oe oe
ar
$OuCoR M2 e 9
AUTO TUNING
IN PROGRESS,
PLEASE WAIT,
AUTO TUNING IS,
COMPLETED.
10
oo ov Zee oo e
©This oper:
ur VCR
Set VCR-~TV switch to VCR for
using POWER 0.
SDATE,. ON. OFF.
@ When Auto Tuning is cancelled halfway, Auto Tuning is not
executed even if the VCR is turned off and then turned on
again. In this case, see page 12 "To restart Plug in Auto
Tuning". (NV-HD675EA only)
Turn on the TV and the VCR.
oe FSFH A TOHVE RAH ROHS THEYRE HOMO
Set the TV to an unused position which you
wish to use for your video playback.
For NV-HD675A
©Tune the TV until the TV programme screen appears.
(Please refer to the TV manufacturers operating
instructions regarding tuning.)
For NV-HD675EA
®Tune the TV until the display shown on the left appears on
the screen, (Please refer to the TV manufacturers
operating instructions regarding tuning.)
Press MENU.
'ation is not necessary for N V-HD675A.
i ata unt