Panasonic NV-HD675 Series Operating Instructions Manual page 24

24
'Se
Q NTSC INPUT SELECT
t NTSC PB SELECT
NTSC CONVERTER
JET REWIND
POWER SAVE
AUDIO MIX
4 Select ON or OFF.
E 3
NTSC INPUT SELE i,
NTSCPBSELECT (onPALTV)
NES CONVERTER (ON
ET REWIND. fon!
POWER SAVE (OFF
AUDIO MIX (OFF;
OFF: Normally set at this position.
ON: PALTV can receive signals from NTSC 3.58
signal source (e.g., NTSC game machines.)
connected to the VCR main unit. However,
when recording, this function does not work.
@ When receiving NTSC 4.43 signals, this function does
not work correctly.
5 Press MENU twice to make the on screen display
disappear.
EY
To Change the Rewinding Speed
This function enables the tape to rewind at the 360 times
speed.
Follow steps 1 to 2 of TAPE SELECT.
3 Select JET REWIND.
C1 > '3
CB)
NI
TER
'REWIND Gy
POWER SAVE (OFF)
AUDIO MIX (OFF)
4 Select ON or OFF.
"TAPE SELECT (essa
NTSC INPUT SELECT TO!
NISCPESELECT (enPALTV)
NISC CONVERTER 'OFF
'a JET REWIND (OFF)
Pry POWER SAVE (OFF)
AUDIO MIX (OFF
© Select OFF if you wish to rewind the VCR slowly.
5 Press MENU twice to make the on screen display
disappear.
ED
For Minimised the VCR's Power
Comsumption When the VCR Is Switched
Off
Follow steps 1 to 2 of TAPE SELECT.
3 Select POWER SAVE.
iy ay a
NTSC INPUT SELECT AUTO)
NTSCPBSELECT (onPALTV)
NTs. TEA (GF
CD aa
4 Select ON or OFF.
PESELE
NTSGINPUT SELECT
NTSC PB SELECT
NISC CONVERTER:
JET REWIND
POWER SAVE
AUDIO MIX
ON: This setting makes the display disappear when
the VCR is off.
It will not operate in the Timer standby mode.
After recording all programmed data, the VCR will
go into Power save mode.
OFF: This setting does not conserve power when the
VCR is off.
5 Press MENU twice to make the on screen display
disappear.
ED