BMW 2 GRAN COUPE 2021 Series Owner's Manual page 281

NOTICE
The compressor can overheat during extended
operation. There is a risk of damage to prop‐
erty, among other potential damage. Do not run
the compressor for more than 10 minutes.
Filling
1. Shake the sealant bottle.
2. Pull filler hose completely out of the cover of
the sealant bottle. Do not kink the hose.
3. Slide the sealant bottle into the holder on the
compressor housing, ensuring that it en‐
gages audibly.
Online Edition for Part no. 01405A37F24 - VI/21
Wheels and tires
4. Screw the filler hose of the sealant bottle
onto the tire valve of the nonworking wheel.
5. With the compressor switched off, insert the
connector into the power socket in the vehi‐
cle interior.
6. With standby state or drive-ready state
switched on, switch on the compressor.
Let the compressor run for max. 10 minutes to fill
the tire with sealing compound and achieve a tire
inflation pressure of approx. 2.0 bar.
While the tire is being filled with sealing com‐
pound, the tire inflation pressure may sporadi‐
cally reach approx. 5 bar. Do not switch off the
compressor in this phase.
MOBILITY
281