BMW 2 GRAN COUPE 2021 Series Owner's Manual page 208

CONTROLS
4. "Parking and Maneuvering"
5. If necessary, "Automatic PDC Activation"
6. "Automatic PDC Activation"
Depending on equipment, an additional camera
view is also switched on.
Automatic deactivation during
forward travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
Switching on/off manually
Press the park assistance button.
▷ On: the LED lights up.
▷ Off: the LED goes out.
The rearview camera image is displayed if the re‐
verse gear is engaged when pressing the park
assistance button.
Depending on the equipment version, the sys‐
tem cannot be switched off manually if the re‐
verse gear is engaged.
Warning
Signal tones
General information
An intermittent tone indicates when the vehicle
is approaching an object. E.g., when an object is
detected at the rear left of the vehicle, a signal
tone sounds from the rear left speaker.
The shorter the distance to the object, the
shorter the intervals.
When the distance to a detected object is less
than approx. 8 in/20 cm, a continuous tone is
sounded.
When there are objects in front of and behind the
vehicle at the same time, with a distance smaller
than approx. 8 in/20 cm, an alternating constant
tone will sound.
208
Driver assistance systems
Online Edition for Part no. 01405A37F24 - VI/21
Steptronic transmission: the intermittent tone
and constant tone are switched off if the selector
lever position P is engaged.
The intermittent tone is switched off after a short
time when the vehicle is stationary.
Volume
The PDC signal tone volume can be adjusted.
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. "Parking and Maneuvering"
5. "Volume PDC signal"
6. Set the desired value.
Visual warning
The approach of the vehicle to an object is
shown on the Control Display. Objects that are
farther away are already displayed on the Control
Display before a signal sounds.
The display appears as soon as PDC is activated.
The range of the sensors is represented in the
colors green, yellow and red when obstacles are
detected.
Lanes are faded in for better estimation of the re‐
quired space.
When the image of the rearview camera is dis‐
played, the switch can be made to PDC or to a
different view with obstacle markings as needed:
1. Press the Controller to the left, if needed.
2. For instance "Park. sensors only"