BMW 2 GRAN COUPE 2021 Series Owner's Manual page 200

CONTROLS
Application range
The system is best used on well-constructed
roads.
The minimum speed that can be set is
20 mph/30 km/h.
The maximum speed that can be set is limited
and, e.g., depends on the vehicle and the vehicle
equipment.
The system can also be activated when station‐
ary.
Turning on/off and interrupting
cruise control
Turning on
Press the button on the steering wheel.
The indicator lights in the instrument cluster light
up and the marking on the speedometer is set to
the current speed.
Cruise control is active. The current speed is
maintained and stored as set speed.
DSC Dynamic Stability Control is switched on, if
necessary.
Turning off
To switch off the system while standing, step on
brake pedal at the same time.
Press the button on the steering wheel:
Button on the steering wheel.
The displays turn off. The stored set speed is
deleted.
Interrupting manually
When active, press the button on the steering
wheel:
Button on the steering wheel.
If interrupting the system while stationary, press
on the brake pedal at the same time.
200
Driver assistance systems
Online Edition for Part no. 01405A37F24 - VI/21
Interrupting automatically
The system is automatically interrupted in the
following situations:
▷ When the driver applies the brakes.
▷ When selector lever position D is disengaged.
▷ Dynamic Traction Control DTC is activated or
DSC Dynamic Stability Control is deactivated.
▷ If DSC Dynamic Stability Control intervenes.
▷ If the safety belt and the driver's door are
opened while the vehicle is standing still.
▷ If the system has not detected objects for an
extended period, for instance on a road with
very little traffic without curb or shoulder
markings.
▷ If the detection range of the radar is impaired,
for instance by contamination or heavy pre‐
cipitation.
▷ After a longer stationary period when the ve‐
hicle has been braked to a stop by the sys‐
tem.
Setting the speed
Maintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted. The system will be ac‐
tivated.
The current speed is maintained and stored as
desired speed.
The stored speed is displayed on the speedom‐
eter.