Safety Instructions; Intended Use; Adjusting The Volume - Beyerdynamic MMX 200 wireless Manual

MMX 200 wireless
EN

SAFETY INSTRUCTIONS

Please read these safety instructions
�
carefully and completely before using
the product.
Please observe all instructions given,
�
especially those concerning the safe
use of the product.
Please also observe the detailed
�
operating instructions for this
product. The instructions can be
downloaded from the beyerdynamic
website at www.beyerdynamic.de.
Do not use the product if it is
�
defective.

Intended use

Only use the product as described in the
product manual. beyerdynamic accepts
no liability for damage to the product
or injury to persons caused by careless,
improper or incorrect use of the product,
or by use for purposes not specified by
the manufacturer.
beyerdynamic is not liable for damage to
USB devices that do not comply with the
USB specifications.
beyerdynamic is not liable for damage
resulting from connection interruptions
due to batteries being empty or too old,
or due to exceeding the Bluetooth®
transmission range.
Please also observe the relevant
country-specific regulations before
using the product.

Adjusting the volume

High volumes and long
listening can permanently
damage your hearing.
Before putting on the headset,
�
set the volume to minimum.
Do not use the headset at high
�
volume for a long time. When
listening and speaking normally
with a headset, your voice should
still be perceptible.
In case of tinnitus, decrease the
�
volume. If necessary, consult a
doctor.
We would like to point out that
�
excessively high volumes and long
listening times may cause hearing
damage.
Hearing impairments are
�
irreversible, so always ensure an
adequate volume level.
It is advisable to keep listening times
�
at high volumes as short as possible.
3