TOOLS REQUIRED
Claw hammer
Safety goggles
Measuring tape
Wall hardware
Installation
1
INSTALLING THE HANGING BRACKETS
NOTE: Before installing, make sure all parts are present.
Compare parts with the Hardware Included list. If any part is
missing or damaged, do not attempt to install the product.
□ Attach the hanging brackets (AA) to the back of
the mirror using the included screws (BB).
BB
AA
3
INSTALLING THE MIRROR
□ For wall stud installation, insert #12 x 3 in. screws with washers into the
stud locations (not included).
□ For drywall installation, drill holes at the appropriate locations and insert
toggle bolts with washers (not included).
□ For concrete wall installation, drill 1/4 in. holes at the appropriate locations
and insert #12 wall anchors, followed by #12 x 3 in. screws (not included).
□ Once the mounting hardware is installed, hang the mirror from the
hardware using the hanging brackets or the hanging wire (not included).
Phillips screwdriver
Power drill
Level
2
1000 003 011, 1000 013 634,
1000 019 054, 1000 398 665,
1000 398 655, 1000 398 646,
1001 572 031, 1001 319 442,
1002 844 079, 1002 844
M2430-JVM, M2430-ACO, M1925-JVO,
MS2431-GOK, MS2431-WHT, MS2431-SVL,
MS2431-TRF, MD2532-CRM, M2935-WHT,
Use and Care Guide
HARDWARE INCLUDED
AA - Hanging bracket
x 2
INSTALLING THE HANGING WIRE
NOTE: This step is optional, and the
hanging hardware is not included.
□ If you choose to use hanging wire (not included), a
steel wire with a minimum weight rating of 75 lbs. is
recommended. Attach it to brackets as shown below.
Please contact 1-888-774-8062 for further assistance.
Item#
081,
Model#
M2935-DV,
Mirror
BB - Screw
x 4
HOMEDEPOT.COM/GLACIERBAY
Need help?
Do you have a question about the M2430-JVM and is the answer not in the manual?
Questions and answers